Forget glue, screws, heat or other traditional bonding methods. A Cornell University-led collaboration has developed a 3D printing technique that creates cellular metallic materials by smashing together powder particles at supersonic speed.

This form of technology, known as "cold spray," results in mechanically robust, porous structures that are 40% stronger than similar materials made with conventional manufacturing processes. The structures' small size and porosity make them particularly well-suited for building biomedical components, like replacement joints.

The team's paper, "Solid-State Additive Manufacturing of Porous Ti-6Al-4V by Supersonic Impact," published Nov. 9 in Applied Materials Today.

The paper's lead author is Atieh Moridi, assistant professor in the Sibley School of Mechanical and Aerospace Engineering.

"We focused on making cellular structures, which have lots of applications in thermal management, energy absorption and biomedicine," Moridi said. "Instead of using only heat as the input or the driving force for bonding, we are now using plastic deformation to bond these powder particles together."

Moridi's research group specializes in creating high-performance metallic materials through additive manufacturing processes. Rather than carving a geometric shape out of a big block of material, additive manufacturing builds the product layer by layer, a bottom-up approach that gives manufacturers greater flexibility in what they create.

However, additive manufacturing is not without its own challenges. Foremost among them: Metallic materials need to be heated at high temperatures that exceed their melting point, which can cause residual stress buildup, distortion and unwanted phase transformations.

To eliminate these issues, Moridi and collaborators developed a method using a nozzle of compressed gas to fire titanium alloy particles at a substrate.

"It's like painting, but things build up a lot more in 3D," Moridi said.

The particles were between 45 and 106 microns in diameter (a micron is one-millionth of a meter) and traveled at roughly 600 meters per second, faster than the speed of sound. To put that into perspective, another mainstream additive process, direct energy deposition, delivers powders through a nozzle at a velocity on the order of 10 meters per second, making Moridi's method sixty times faster.

The particles aren't just hurled as quickly as possible. The researchers had to carefully calibrate titanium alloy's ideal speed. Typically in cold spray printing, a particle would accelerate in the sweet spot between its critical velocity - the speed at which it can form a dense solid - and its erosion velocity, when it crumbles too much to bond to anything.

Instead, Moridi's team used computational fluid dynamics to determine a speed just under the titanium alloy particle's critical velocity. When launched at this slightly slower rate, the particles created a more porous structure, which is ideal for biomedical applications, such as artificial joints for the knee or hip, and cranial/facial implants.

"If we make implants with these kind of porous structures, and we insert them in the body, the bone can grow inside these pores and make a biological fixation," Moridi said. "This helps reduce the likelihood of the implant loosening. And this is a big deal. There are lots of revision surgeries that patients have to go through to remove the implant just because it's loose and it causes a lot of pain."

While the process is technically termed cold spray, it did involve some heat treatment. Once the particles collided and bonded together, the researchers heated the metal so the components would diffuse into each other and settle like a homogeneous material.

"We only focused on titanium alloys and biomedical applications, but the applicability of this process could be beyond that," Moridi said. "Essentially, any metallic material that can endure plastic deformation could benefit from this process. And it opens up a lot of opportunities for larger-scale industrial applications, like construction, transportation and energy."

Research paper

Related Links
Cornell University
Space Medicine Technology and Systems

Tweet

Thanks for being here; We need your help. The SpaceDaily news network continues to grow but revenues have never been harder to maintain. With the rise of Ad Blockers, and Facebook - our traditional revenue sources via quality network advertising continues to decline. And unlike so many other news sites, we don't have a paywall - with those annoying usernames and passwords. Our news coverage takes time and effort to publish 365 days a year. If you find our news sites informative and useful then please consider becoming a regular supporter or for now make a one off contribution.
SpaceDaily Contributor $5 Billed Once credit card or paypal		SpaceDaily Monthly Supporter $5 Billed Monthly paypal only

Graphene-based memory resistors could lead to brain-based computing
Washington DC (UPI) Oct 29, 2020
Researchers have created a new computer component capable of toggling between 16 possible memory states - the kind of computing versatility provided by brain synapses. The new component, called a graphene field effect transistor, described Thursday in the journal Nature Communications, could pave the way for advances in brain-inspired computing. Modern computers are exclusively digital, featuring two states: on-off or zero and one. Engineers at Penn State University are working to build ... read more